Skip to content

When Should You Prune Lavender in Australia? Timing by Type and the 8-8-8 Rule

When should you prune lavender in Australia? Timing by type, the 8-8-8 rule adapted for Australia, how far to cut back and the biggest pruning mistakes.

TarlaTapan 16 November 2026 Updated: 19 November 2026 7 min read
When Should You Prune Lavender in Australia? Timing by Type and the 8-8-8 Rule

When Should You Prune Lavender in Australia? When to prune lavender in Australia: the main prune is in late summer to early autumn, after the plant finishes flowering. In most areas that means around March to April. Pruning every year keeps lavender compact, full of flowers and less woody. This guide explains timing for each type and how hard to cut.

Advertisement

Best time to prune lavender in Australia

The best time for the main prune is late summer to early autumn, once flowering has finished. Australian garden guides recommend finishing this prune a few weeks before cool winter weather. That gives new shoots time to firm up before cold nights.

In frost-free areas, a light tidy-up later in autumn is fine. In cold, frosty areas, avoid heavy pruning in late autumn and winter, because soft new growth can be damaged.

Advertisement

Pruning by lavender type

TypeWhen to pruneHow
EnglishLight trim after first flowers; main prune early autumnCut back by about a third
FrenchLate summer to autumnFull trim; also clip lightly after flushes
SpanishAfter main flowering in summerTrim off spent heads and a little foliage
LavandinEarly to mid autumnFirm prune into the green growth

English lavender

English lavender benefits from two cuts. After the first flush of summer flowers, trim off the spent stems to encourage more blooms. In early autumn, give it the main prune, cutting back about a third of the plant into a neat mound.

French lavender

French lavender flowers over a long season. Trim lightly after each big flush of flowers, then give it a fuller prune in late summer to autumn. Garden Clinic also suggests a trim in early January in warm areas.

Lavandin and hybrids

Lavandin grows large and fast. Prune in early to mid autumn, cutting off all flower stems and shaping the bush. Some Australian hybrids are clipped back to about two thirds of their size in late summer.

How hard to prune lavender

Cut back hard enough to keep the plant compact, but always leave green, leafy growth on each stem. Most lavender does not reliably reshoot from bare, grey old wood. If you cut into wood with no leaves, that part of the plant may die.

A good guide is to remove about a third of the plant, or to cut a few centimetres above the woody base. Shape the plant into a rounded mound so light reaches every side.

Advertisement

How to prune lavender step by step

  1. Use clean, sharp secateurs or hand shears.
  2. Gather a handful of stems and cut them in one go, like a haircut.
  3. Remove all spent flower stems first.
  4. Cut the leafy growth back by about a third, staying above the old wood.
  5. Shape the plant into a dome.
  6. Clear away clippings from the base to keep air moving.

Fixing old, woody lavender

Lavender that has not been pruned for years becomes woody, open and floppy. You can try to revive it by cutting back slightly in spring, when new growth appears, and only where green shoots are present.

Results vary. Sometimes old plants reshoot from hard wood, often they do not. If a plant is very woody and bare, it is usually better to replace it and prune the new one every year from the start.

For related care, see why lavender dies in Australia and growing lavender in Australia.

What is the 8-8-8 rule for lavender, and does it work in Australia?

The 8-8-8 rule is a popular pruning reminder for English lavender: prune around the 8th of August, cut the plant back by about eight inches (20 cm) and keep green leaves below the cut. It comes from the Northern Hemisphere, so the date does not fit Australia.

In Australia, the same moment after summer flowering falls in late summer, usually February to early March, depending on your region. The 8 August date would mean pruning in the middle of the Australian winter, which is not ideal. Take the rule as a seasonal prompt, not a fixed measurement: on small or young plants, cutting back a full 20 cm can be too much.

The part of the rule that always applies is the last one. Never cut into bare, old wood, because lavender rarely grows back from it. Always leave some green growth on each stem.

What is the biggest mistake people make when pruning lavender?

The biggest mistake when pruning lavender is cutting into old, bare wood with no leaves. Lavender rarely shoots again from these brown stems, so the cut part often stays bare or dies.

The second common mistake is not pruning at all. Unpruned lavender becomes leggy, opens up in the middle and flowers less each year. Light, regular pruning every year keeps plants compact and much longer-lived.

When should you not cut back lavender?

Do not cut lavender back hard in winter, during frost or in the heat of a summer heatwave. Fresh cuts at these times stress the plant and can lead to dieback.

Also avoid heavy pruning in late autumn in cold regions, because new growth will not harden before frost. Light tidying, such as removing spent flower stems, is fine at almost any time.

How far can lavender be cut back?

Lavender can be cut back by about one-third to one-half of its height, as long as some green leaves remain on every stem. For most plants this means cutting just above the woody base.

If a plant is very old and woody, reduce it gradually over two or three seasons instead of all at once. Once lavender has become mostly bare wood, replacing it with a young plant grown from a cutting is often the better option.

More Australian Lavender Guides

Frequently Asked Questions

What month should I prune lavender in Australia?

Prune lavender mainly in late summer to early autumn, usually around March to April in most of Australia. Do it after flowering and a few weeks before cold weather.

Can I cut lavender right back?

You can cut lavender back by about a third, but do not cut into bare, woody stems with no leaves. Most lavender will not regrow reliably from old wood.

Should I deadhead lavender?

Yes, removing spent flowers keeps lavender tidy and encourages more blooms, especially on English and French lavender. Cut flower stems back to the leafy growth.

Can you prune lavender in winter in Australia?

In frost-free areas, light winter trimming is fine. In cold, frosty areas, avoid heavy pruning in winter, because new growth can be damaged by frost. Do the main prune in late summer to autumn.

Why did my lavender die after pruning?

Lavender often dies after pruning when it was cut into old, leafless wood. Pruning in cold, wet weather can also lead to rot. Always leave green growth on each stem.

TarlaTapan

TarlaTapan guides focus on practical, field-tested growing advice. Corrections and suggestions are welcome at info@tarlatapan.tr.